How to Get Water Out of Your Phone Speaker


Throwing your phone is a time of bad luck; seek help and look for How to get water out of your phone speaker properly! 

Drink of water and accidentally got water in your phone speaker? I know I have. It’s not a great feeling. Here are some tips on How to get water out of your phone speaker in the future!

What happens if water goes in speaker?

What happens if water goes in speaker?

Water damage to a phone’s speaker can cause a variety of issues: 

  • The most common problem is that the sound quality of the speaker will be diminished. 
  • In some cases, the sound may become distorted or muted. 
  • Additionally, water damage can cause corrosion to the speaker’s circuitry, which may lead to problems with the phone’s overall performance.

Does water ruin phone speakers?

Does water ruin phone speakers?

It is a common misconception that water ruins phone speakers. 

Water can actually cause speaker failure, but this is usually due to corrosion. Corrosion is the result of water mixed with other contaminants, such as salt, chemicals, or dirt. 

When these contaminants come into contact with metal, they can cause the metal to degrade.

How to get water out of your phone speaker?

How to get water out of your phone speaker?

If your phone speaker is wet, there are a few things you can do to try and dry it out. 

1. Turn off the phone

If you’ve ever accidentally dropped your phone in water, you know the sinking feeling that comes along with it. But don’t worry, there’s a way to fix it!

Turning your phone off as soon as possible is key to saving it from water damage. This will help to prevent any further damage from occurring.

Once your phone is turned off, remove the battery (if possible) and SIM card. These can all be dried separately. 

2. Use Hairdryer 

If your phone speaker is wet, you can use a hairdryer to get the water out. First, make sure that the hairdryer is on the lowest setting. Then, hold the hairdryer about six inches away from the speaker and move it around in a circular motion.

 Do this for about 30 seconds. Next, turn off the hairdryer and let the speaker dry for a few minutes. If there is still water in the speaker, repeat these steps until the water is gone.

3. Use a Vacuum Cleaner

If you’re phone speaker is sounding a little bit muffled, it might be because water has gotten into it. But don’t worry, there’s an easy fix. Just grab a vacuum cleaner and turn it on to the lowest setting. 

Put the vacuum cleaner up to the speaker and make sure it’s not too close, then let it run for a few minutes. The vacuum cleaner will suck out the water and your speaker should be good as new!

4. Put it on the rice

Put it on the rice

If your phone speaker is still wet, you can try placing it in a bowl of uncooked rice overnight to help absorb the moisture.

If you’re the unlucky owner of a water-logged phone, there’s a good chance you’ve tried shoving it in a bag of rice in hopes of absorbing the moisture. But does this method really work?

Yes, rice can help to absorb moisture from your phone speaker. Place your phone speaker-side down into a bowl or container of rice, and let it sit for 24-48 hours. The rice will help to draw out the moisture from your phone speaker.

If your phone speaker is still wet after 24-48 hours, you may need to repeat the process. Once your phone speaker is dry, be sure to wipe it down with a clean, dry cloth before using it again.

5. Take to service center

If your phone has gotten wet and the speaker isn’t working, you can try to fix it yourself or take it to a repair store.

If you’re not comfortable doing it or if it doesn’t work, take your phone to a repair store. They’ll be able to open up your phone and remove any water from the inside.

What are signs of water damage on a phone?

What are signs of water damage on a phone?

Water damage on a phone can cause the speaker to stop working. Water can also damage the microphone, which can lead to static or dropouts on phone calls.

 If your phone has been exposed to water, look for these signs of water damage:

  • Water spots on the screen
  • Foggy or blurred screen
  • White spots under the screen
  • Water droplets in the camera lens
  • Splotchy or discolored paint
  • Missing paint
  • Rusted metal parts

What is water eject mode?

Water eject mode is a feature on some phones that helps you get rid of water in your phone’s speaker. To use it, you’ll need to put your phone into this mode and then wait a few minutes for the water to be ejected.

You can usually find water eject mode in the settings menu on your phone. If you’re not sure where to find it, you can check your phone’s manual or ask someone who knows about these things.

Once you’ve found water eject mode, all you need to do is turn it on and wait for the water to be ejected from your speaker. This usually takes a few minutes, so be patient.

If you’re having trouble getting rid of the water in your speaker, there are a few things you can try. 

First, make sure that you’re using water eject mode correctly. If that doesn’t work, try using a hairdryer on the lowest setting to help dry out your speaker. You can also try sticking your phone in a bag of rice overnight to absorb any moisture that’s still in there.

How do I eject water from my Android?

If your phone speaker is damaged, it’s likely because water has entered the speaker and caused corrosion. Water can enter the speaker through the microphone opening or any other small opening on the phone. Once water enters the speaker, it can cause sound distortions and eventually damage the speaker temporarily or permanently.

To remove water from your Android speaker, start by unplugging your phone from any power sources. Next, use a small, soft-bristled brush to clean any dirt or debris out of the microphone opening.

Once the microphone opening is clear, hold your phone so that the speaker is pointing down and shake it gently for 30 seconds. After 30 seconds, turn your phone upside down and tap on the back of the phone to help dislodge any remaining water droplets. Finally, dry your phone with a soft cloth and reattach any covers or cases to make your speaker louder.

How do I get water out of my speakers fast?

There are a few things you can do to get the water out of your speaker as quickly as possible.

First, remove the battery if possible and dry it off with a microfiber cloth. If you can’t remove the battery, then power off the device.

Next, take a piece of paper towel or a cotton swab and gently dab at the water inside the speaker. Be careful not to push too hard, as this could damage the speaker.

Once you’ve removed as much water as possible, blow into the speaker to help dislodge any remaining water droplets. Finally, use a vacuum cleaner to vacuum out any remaining moisture.

Will water in speakers go away?

It really depends on how much water is in your speaker. If it’s just a little bit, then it’s possible that the water will eventually evaporate and you’ll be fine. But if it’s a lot of water, or if the speaker was completely submerged, then you might have some problems.

If you’re not sure how much water is in your speaker, the best thing to do is to take it apart and have a look. It’s usually not too difficult to take apart a speaker, but if you’re not comfortable doing that, then you can always take it to a repair shop and have them take a look.

Once you’ve taken the speaker apart, check to see if there are any obvious signs of damage. If there are, then you might need to replace some parts. But if everything looks okay, then you can try drying out the speaker with a hair dryer or by putting it in front of a fan.

Once the speaker is dry, put it back together and try using it again. If it still doesn’t work, then you might need to buy a new one.

How long does it take for water to evaporate from a phone?

It depends on how much water got into the speaker, and the size and design of the phone. Small amounts of water will usually evaporate within a day or two. If you’re concerned, you can try putting your phone in a dry rice container to help absorb any moisture.

How do I make Siri eject water?

There are a few ways you can get water out of your phone speaker. One way is to take a can of compressed air and blow it into the speaker. Another way is to use a vacuum cleaner with the hose attachment to suck the water out. You can also try using a hairdryer on the low setting to evaporate the water.

"Music expresses feeling and thought, without language; it was below and before speech, and it is above and beyond all words." - I am a music enthusiast and love to share about it!

Leave a Comment